Current Posts

Bypass Airflow

Conditioned air that does not reach computer equipment. Some bypass air is inevitable and without containment, some bypass air is prudent. Unintended bypass air can occur by escaping through cable cut-outs, holes under cabinets, misplaced perforated tiles or holes in the computer room perimeter walls.

Posted in:

Leave a Comment (0) →

Branch Circuit Monitoring (BCM)

A monitoring system used to record and monitor an individual electrical circuit. Typical parameters which are monitored include amperage, voltage, power factor, apparent power (volt amps), real power (watts) and energy usage ( watt-hours). The branch circuit is typically defined to be a the circuit fed by a single breaker or 3 phase set of breakers in a multi-breaker panel.

Posted in:

Leave a Comment (0) →

Blanking Panel

A metal or plastic strip mounted in unused U spaces in a rack that restricts recirculation airflow, also called blanking or filler plates.

Posted in:

Leave a Comment (0) →

Blade Server

A server architecture that houses multiple server modules (“blades”) in a single chassis. It is widely used in datacenters to save space and improve system management. Either self-standing or rack mounted, the chassis provides the power supply, and each blade has its own CPU, memory and hard disk. Redundant power supplies may be an option. Blade servers generally provide their own management systems and may include a network or storage switch.

Posted in:

Leave a Comment (0) →

Alternating Current AC

The designation given to power that is delivered in the form of a sinusoidal wave form. AC won out over DC as the preferred method of delivering and using power in the industrial age due to the ease of voltage transformation using static devices (transformers).

Posted in:

Leave a Comment (0) →

Aisle

The open space between rows of racks. Open airflow designs dictates racks should be arranged with consistent orientation of front and back to create ‘cold’ and ‘hot’a isles; but aisle containment designs and alternative cooling methods may dictate alternate configurations.

Posted in:

Leave a Comment (0) →

Airside Economizer

A device consisting of fans, ducting and a control which utilizes outside air directly to cool the data center when environmental conditions allow. Air is typically filtered, brought into existing distribution system and then exhausted back to the atmosphere. Economizers can save data center operators substantial operating costs. According to GreenerComputing.org, economization has the potential to reduce the annual cost of a data center’s energy consumption by more than 60 percent. Use of cooler external environmental temperatures to preserve hardware is an important component in sustainable green computing practices in general. Unfortunately, economizers are only useful for data centers located in cooler climates.

Posted in:

Leave a Comment (0) →

U

Utility/general use cables to be used outdoors, indoors where protected but not in an air plenum.

Posted in:

Leave a Comment (0) →
Page 20 of 42 «...101819202122...»